BRISBANE, AUS, Oct 8, 2026 – (ACN Newswire) – Graphene Manufacturing Group Ltd. (TSXV: GMG) (OTCQX: GMGMF) (“GMG” or the “Company“) is pleased to provide the latest progress update on the next generation graphene battery technology being developed by GMG under a Joint Development Agreement with Rio Tinto, one of the world’s largest metals and mining groups, and with the support of the Battery Innovation Center of Indiana (“BIC”) in the United States of America.
GMG is pleased to share the following cycling data of GMG’s fast charging G®CELLS (1.5 Ah cells with 6 minute charging) as seen in Figure 1, with energy density and energy efficiency graphs shown in Figure 2. This data was collected by the BIC on cells that were made by the BIC with materials that were developed, manufactured and supplied by GMG in its Brisbane Battery Development Centre.
Figure 1 shows that G®CELLS have cycled with no performance reduction after 1000 cycles, as at October 7th 2026, which is a doubling of cycle life since the previous GMG battery performance announcement1, despite being charged and discharged in 6 minutes (at 7C). Figure 1 also shows the performance of a well-known Lithium Titanate Oxide (LTO) battery which, when charged and discharged at the same time of 6 minutes (at 10C) degraded to 80% of original capacity (which is typically the declared end of life of a cell) within 82 cycles. Another G®CELL was also charged and discharged in 6 minutes (at 10C) and registered only a 10% reduction after 393 cycles. The G®CELLS effectively last 10 times longer whilst being charged and discharged in the same time.
Figure 1: GMG G® CELLS and LTO Cycling Data
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/318037_08d51822742ee86a_001full.jpg
Figure 2 shows a 48% increase of the energy density of 58 Wh/kg whilst being charged in 6 minutes (at 10C) over previous reported energy density of 39 Wh/kg in GMG’s previous battery performance announcement1.
The G®CELLS also show a 94% energy efficiency which is high especially at such a high charge and discharge rate – when compared to the 64% energy efficiency of the tested LTO.
Figure 2: GMG G® CELLS and LTO Energy Density and Energy Efficiency Data
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/318037_08d51822742ee86a_002full.jpg
Bob Galyen, GMG Director and former Chief Technology Officer of CATL, commented: “The cycling stability we are seeing from these G®CELLS is genuinely exceptional. Reaching 1,000 cycles with no performance reduction, while every cycle is charged and discharged in six minutes, stands in stark contrast to the LTO benchmark cell. LTO is regarded as one of the most robust fast-charging chemistries on the market today, yet it degraded to 80% of its original capacity within 82 cycles under the same six-minute charge and discharge time. Just as important is the 94% energy efficiency at these high rates, compared with 64% for the LTO cell. Energy that isn’t lost as heat is what makes fast charging practical at the system level. Having built and scaled battery manufacturing for the world’s largest lithium-ion producer, I know how rare it is to see fast-charge durability, high efficiency and rising energy density together this early in a cell’s development. There is further work ahead on extending cycle life at 10C and scaling the cell size, but the fundamentals being demonstrated here are the right ones to be solving first.”
Craig Nicol, Chief Executive Officer and Managing Director of GMG, commented: “This data set from BIC is an important proof point for our graphene battery program. Since our last update we have doubled cycle life to 1,000 cycles with no performance reduction and lifted energy density by 48% to 58 Wh/kg at a 10C charge rate. We have also achieved 94% energy efficiency, all while charging and discharging in six minutes. Fast charging is one of the biggest barriers to broader electric vehicle and energy storage adoption. These results show G®CELLS lasting around ten times longer than a comparable LTO cell charged and discharged in the same time. Our focus now is on continuing to improve energy density and 10C cycle life, and on scaling to larger cell formats. I want to thank the team at BIC and our partners at Rio Tinto for their continued collaboration as we progress this technology along the roadmap.”
Jack Perkowski, Chairman of GMG, commented: “Battery development of this kind requires patient capital, disciplined engineering and world-class partners, and this update reflects progress on all three fronts. Since our last update, cycle life has doubled and energy density has risen by 48%. This data was generated by BIC, an organisation with over 10 years of experience and more than 500 battery development projects behind it, on cells built with GMG’s graphene materials. That gives the Board real confidence in the direction of this program. Combined with the ongoing support of Rio Tinto, I believe GMG is building the right foundations to advance this technology toward commercial relevance. The Board will continue to support management as they work through the optimisation and scale-up steps ahead.”
Please see the following webpage for further details about the graphene batteries: https://graphenemg.com/graphene-products/gcells/. The G®CELLS are in pouch format – as seen in Figure 3. The launch video link for G®CELLS is shown in Figure 4.
Figure 3: G Cell Pouch Cell Battery
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/318037_08d51822742ee86a_003full.jpg
Figure 4: G®CELLS Launch Video
Launch video: https://youtu.be/pfHhh5-TLyU
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8082/318037_08d51822742ee86a_004full.jpg
Launch video: https://youtu.be/pfHhh5-TLyU
About BIC:
BIC is a collaborative initiative designed to incorporate leadership from renowned universities, government agencies, and commercial enterprises. BIC is a public-private partnership and a not-for-profit organization focusing on the rapid development, testing and commercialization of safe, reliable and lightweight energy storage systems for defense and commercial customers. BIC is a unique organization that has been leading battery cell development for world leading battery companies for over 10 years and has carried out over 500 battery development projects.
About GMG
GMG is an Australian based clean-technology company which develops, makes and sells energy saving and energy storage solutions, enabled by graphene manufactured via in house production process. GMG uses its own proprietary production process to decompose natural gas (i.e. methane) into its natural elements, carbon (as graphene), hydrogen and some residual hydrocarbon gases. This process produces high quality, low cost, scalable, ‘tuneable’ and low/no contaminant graphene suitable for use in clean-technology and other applications.
The Company’s present focus is to de-risk and develop commercial scale-up capabilities, and secure market applications. In the energy savings segment, GMG has initially focused on graphene enhanced heating, ventilation and air conditioning (“HVAC-R”) coating (or energy-saving coating) which is now being marketed into other applications including electronic heat sinks, industrial process plants and data centres. Another product GMG has developed is the graphene lubricant additive focused on saving liquid fuels initially for diesel engines. GMG has also developed a graphene water based coolant additive focused on increasing heat transfer and reducing bacterial growth in cooling water circuits.
In the energy storage segment, GMG is working collaboratively with financial support from the Australian Government to progress R&D and commercialization of GMG Graphene Batteries. GMG has also developed a graphene additive slurry that is aimed to improve the performance of lithium-ion batteries.
GMG’s 4 critical business objectives are:
- Produce Graphene and improve/scale cell production processes
- Build Revenue from Energy Savings Products
- Develop Next-Generation Battery
- Develop Supply Chain, Partners & Project Execution Capability
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news release.
Cautionary Note Regarding Forward-Looking Statements
This news release includes certain statements and information that may constitute forward-looking information within the meaning of applicable Canadian securities laws. Forward-looking statements relate to future events or future performance and reflect the expectations or beliefs of management of the Company regarding future events. Generally, forward-looking statements and information can be identified by the use of forward-looking terminology such as “intends”, “expects” or “anticipates”, or variations of such words and phrases or statements that certain actions, events or results “may”, “could”, “should”, “would” or will “potentially” or “likely” occur. This information and these statements, referred to herein as “forward‐looking statements”, are not historical facts, are made as of the date of this news release and include, without limitation:
- statements that GMG Graphene Batteries are safe and fast charging, and that graphene can be used to increase their performance and cycle life;
- statements regarding the Company’s ability to further improve the energy density, cycle life (including at a 10C charge rate) and energy efficiency of G®CELLS, and to scale the cell size;
- GMG’s intentions to develop commercial scale-up capabilities;
- GMG’s focus in the energy savings segment;
- GMG’s intentions for the use of graphene lubricant additive on saving liquid fuels;
- expectations for R&D and commercialisation of Graphene Batteries;
- GMG’s ability to improve the performance of lithium-ion batteries;
- statements attributed to Bob Galyen, Craig Nicol and Jack Perkowski regarding the significance of the BIC cycling, energy density and energy efficiency data, the Company’s technology, partnerships and commercial prospects; and
- the Company’s four critical business objectives.
Such forward-looking statements are based on a number of assumptions of management, including, without limitation:
- assumptions that GMG Graphene Batteries can be produced at lower cost;
- assumptions as to charging time, energy density, energy efficiency, life cycle, safety, thermal runaway risk and the need for a thermal management system for GMG Graphene Batteries, and the speed and stability of charging;
- that G®CELLS will continue to cycle without material performance reduction beyond the cycles reported in this news release;
- that GMG Graphene Batteries will progress to BTRL 7 and 8;
- that a range of global companies in a variety of industries will be interested in working with GMG;
- that the battery pack design will be plastic and offer weight, cost and complexity advantages to a metal case and increased energy density;
- that the service agreement with the BIC will enable the Company to optimize its cell design and battery manufacturing equipment;
- that the Company will be able to further improve energy density and 10C cycle life, and scale the cell size, as anticipated; and
- that the Company will be able to meet its overall timeline on the battery cell roadmap.
Additionally, forward-looking information involves a variety of known and unknown risks, uncertainties and other factors which may cause the actual plans, intentions, activities, results, performance or achievements of GMG to be materially different from any future plans, intentions, activities, results, performance or achievements expressed or implied by such forward-looking statements. Such risks include, without limitation:
- that GMG Graphene Batteries cannot be produced at lower cost, or that any of the assumptions as to charging time, energy density, energy efficiency, life cycle, scaling of the cell size, safety, thermal runaway risk and the need for a thermal management system for GMG Graphene Batteries cannot be achieved;
- that GMG Graphene Batteries do not offer expected speed and stability of charging;
- that cycling testing, which is ongoing as at October 7, 2026, will show performance reduction in later cycles;
- that GMG Graphene Batteries will not progress to BTRL 7 and 8;
- that a range of global companies in a variety of industries will not be interested in working with GMG;
- that the battery pack design will not be plastic and will not offer weight, cost and complexity advantages to a metal case and increased energy density;
- that the Company will not be able to optimize the electrochemical behaviour of the pouch cell through laboratory experimentation or at all;
- that the Company will not be able to further improve energy density or 10C cycle life, or scale the cell size, as anticipated or at all;
- that the Company will not be able to meet its overall timeline on the battery cell roadmap;
- that the service agreement with the BIC will not enable the Company to optimize its cell design and battery manufacturing equipment;
- that further testing or larger-format cells will not replicate the cycling, energy density or energy efficiency performance reported in this news release;
- that the Joint Development Agreement with Rio Tinto will not continue on the terms or timeline currently anticipated;
- that GMG’s operations could be adversely affected by possible future government legislation, policies and controls, by changes in applicable laws and regulations, or by the failure to obtain all necessary regulatory approvals;
- that public health crises such as pandemics may adversely impact GMG’s business and the ability of the Company to develop its products;
- the volatility of global capital markets;
- political instability;
- the failure of GMG to attract and retain skilled personnel;
- unexpected development and production challenges;
- that GMG could face technology or software disruptions;
- unanticipated costs;
- risks relating to the extent and duration of the conflicts in Eastern Europe and the Middle East and their impact on global markets;
- that the Company will be unable to develop, market, and sell its products as currently anticipated;
- that the Company will be unsuccessful in identifying and engaging strategic partners;
- that the Company will be unable to acquire equipment to streamline its production process, or that the expansion of its production facilities will not result in the benefits currently expected;
- that companies currently working with GMG, or parties that have entered into NDA arrangements with the Company, will not be interested in purchasing the Company’s products;
- that GMG’s products may not perform as anticipated or deliver the expected commercial benefits;
- that GMG’s proprietary production processes may not provide an alternative to traditional graphite supply chains;
- that the Company will be unable to grow its sales or revenues as anticipated;
- that third-party market data and industry projections will not be accurate as presented; and
- the risk factors set out under the heading “Risk Factors” in the Company’s annual information form dated November 04, 2025, available for review on the Company’s profile at www.sedarplus.ca.
Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that is incorporated by reference herein, except in accordance with applicable securities laws.
1 https://graphenemg.com/gmg-announces-long-life-battery-cycling-data/
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/318037
Topic: Press release summary
Source: Graphene Manufacturing Group Ltd
Sectors: Metals & Mining, Engineering, Manufacturing
http://www.acnnewswire.com
From the Asia Corporate News Network
Copyright © 2026 ACN Newswire. All rights reserved. A division of Asia Corporate News Network.
